What’s In the Box?
1 X Frame
1 X Front Harness with comfort sleeves (attached to Frame)
1 X Instruction Manual
1 X set Leg Rings Rear Support
2 X Stirrups
1 X Extra Fastener Set
The frame is blue powder-coated aluminum. Mini Wheelchair Frame comes with Width Connector, Extenders, Struts, and Wheels installed.
The Front Harness:
The Front Harness will come attached to the Mini Wheelchair Frame, with removable comfort sleeves attached. Red strap goes under pet’s front legs, black strap goes across chest, blue strap clips over pet’s back. The Front Harness may be removed for washing.
The Leg Rings are the rear support system for the pet. Comfortable foam leg rings connected in the center with touch-fastener closures form a flexible “seat” for the pet. Rubber-coated wires wrap around the Wheelchair Frame to connect the Leg Rings easily to the Wheelchair Frame with rubber-coated wires that wrap around the frame.
Stirrups are used to hold the pet’s legs off the ground if the rear legs are paralyzed. The top end of each stirrup is secured around each back knob of the Wheelchair Frame. The top lock balls are used to hold stirrups in place; the bottom lock balls are secured above the dog’s hocks.
The manual gives instructions and tips on assembling and using the Walkin’ Wheels Wheelchair.
Extra Fastener Set:
The Extra Fastener Set comes with extra carriage bolts, screws, nuts, and washers in case of unexpected loss of these items from the Wheelchair Frame or Front Harness.
Rear Dog Wheelchair Mini – Sizer
Our Walkin’ Wheels Sizer does it all for you! Follow the steps below, and you’ll see the exact size and price of the wheelchair you need.
1: Measure your pet’s Fold of Flank.
The Fold of the Flank (FOF) is a thin piece of skin that connects the dog’s upper rear leg to his body. Look at the webbing between your thumb and index finger. This skin is very similar to the fold of flank (FOF).
2. Measure your pet’s armpit to rump.
Sizer will give you the price and exact wheelchair configuration you need for your pet.